For Sale
For Sale

My wife and I have been thinking of selling our toy so that we can find a more family friendly sports car.  I have been building this car for 5 years, and have probably done almost every modification that anyone has suggested on Bimmerforums.  The car runs and drives beautifully, and it really makes me sad to even consider selling it.  I have finally sorted out all the noises/squeaks/error codes/engine problems/tire rubbing etc.  If anyone is looking for a turn key supercar, this is it. The car has awesome power and is very drivable. Even though the car has 195k miles, almost every single moving part has been replaced, and there is less than 2000 miles on the engine.  I would love to get $45k for it, which I know is a large amount of money, however I think one ride in the car will change anyone's opinion.

  1999 Arctic Silver, Gray/Black Interior Z3 M Coupe
     
  Engine:_________________________________________________________________________
  General 1500 miles on 466rwhp/425rwtq engine
    New S54 3 core radiator
    S54 Oil Filter housing
    New S54 oil cooler radiator
    Randy Forbes oil distribution block
    Cooling Fan Delete, installed 16" 400 Spal Fan
    New Stewart waterpump
    New M3 steering cooler lines
    New Air Con Pump
    Carbon Fiber Engine/Fuel rail covers
    New AKG Polyurethane 95A Motor mounts 
    Weld in front subframe motor mounts plates from Rally Road
  Block Bored, decked, new bearings freeze plugs, etc
    Nut on oil pickup welded
    Forged Low Compression S52 pistons and rings custom made by Ross Racing Pistons
    Forged 4340 Chrome-Moly Connecting Rods by Pauter Machine Co.
  Head 3 angle perforamce grind valve job
    Custom RMS firering head gasket
    ARP 2000 head stud kit
    Vanos rebuilt
    Schrick 276/270 Camshafts
    Irridium spark plugs
  Intake Bosche 803 MAF
    Thermoplastic Intake tube on supercharger that has aluminum end caps bonded on to prevent the tube from slipping off of the supercharger housing
    Riot Racing Big Bore Throttle Body
    M50 manifold
    60 lb Lucas injectors
    Bavarian Autosport High-Performance Ignition Coil Set
    300lph High flow Fuel pump
  Performance Polished Vortech V2-Ti Supercharger
    RMS Supercharger mounting brackets
    RMS 8 rib 7.5" crank pulley,  RMS 8 rib 3.47" supercharger pulley, RMS 8 rib belt tensioner kit
    RMS Aftercooler with radiator mounted low in bumper
    Forge Motorcport by-pass valve
    RMS Oil Catch Can
    Aquamist HFS3 Methanol Injection Kit
    RMS Custom stainless steel methanol tank, located in air pump location; air pump relocated to windshield washer tank location.
    Tuned by Jordan at RK Tunes
  Exhaust RMS SuperSport long tube ceramic coated Headers, drilled for smog pump
    custom dual 2.5" stainless steel Exhaust with M5 cats, Magnaflow mufflers
    New Bosch O2 sensors
     
  Drivetrain:_______________________________________________________________________
    6 Speed "Euro E36" Transmission, all new seals
    RMS Short Shift kit for 6 Speed M Coupe
    New shifter cup plastic bushings
    New Shift cup rod with urethane bushing
    New E21 Transmission Mounts with Aluminum Cups
    FX Racing Lightweight Chromoly Flywheels
    FX Racing Heavy-Duty Pressure Plate
    FX Racing Stage 3 'MIBA' 6-Puck Copper Ceramic Sprung Disc Clutch
    New Clutch Slave cylinder with CDV-Delete 
    New transmission mounts
    Randy Forbes Subframe Reinforcement Kit, with dual ear diff cover
    3.23 LS rear differential
    Race-Logic traction control system with launch control
    Drive shaft shortened and balanced for 6 speed
    New Guibo
     
  Suspension:______________________________________________________________________
    TC Kline SA coilovers in front
    TC Kline Front Camber plates
    Polished Front Strut Bar
    New Front Control Arms + polyurethane bushings
    TC Kline Koni shocks in rear  with 600lb springs(also have 500lb springs)
    Rear Upper Shock Mounts that allow removal of rear shocks without removing the interior
    New Rear control arm polyurethane bushings
    New IE green polyurethane subframe bushings
    Reinforced rear sway bar tabs
    H&R Front heavy duty sway bar
     
  Brakes/Wheels:__________________________________________________________________
    Rallyroad caliper brackets front/rear
    Front: 345mm CSL cross-drilled floating rotors
    Brembo 996 351 425/426 front calipers, rebuilt, painted red
    Rear: 328 CSL cross-drilled floating rotors
    Brembo 996.352.421/422 rear calipers, rebuilt, painted red
    Custom vinyl "Coupe" graphics on calipers
    17" Apex Arc-8 Wheels in black; 9" front et20; 10.5" rear et27 with appropriate spacers and wheel bolts running 235/45 front, 275/40 rear Nitto R Compound tires
    18" Apex Arc-8 Wheels in hyper black; 9.5" front et22; 10.5" rear et27 with appropriate spacers and wheel bolts running 255/45 front, 295/40 rear Hankook Ventus V12 tires 
    ATE racing blue brake fluid
     
  Body/Exterior:____________________________________________________________________
    New Paint - Arctic Silver
    Color matched spoiler
    New windshield
    Euro clear front turn signals
    Quick-Removable sunroof pins with tool from Ron Stygar
    Window Tint
    Green/blue vinyl stripes 
    Original Apexcone Projector Z HID headlights with halos
    Never Done front bumper mini splitters
    Never Done rear diffuser
     
  Interior:__________________________________________________________________________
    Driver and Passenger seat show no wear -Gray/Black
    Seat tilt kit
    Seat sliders fix
    Glove box fix
    Center console arm rest/cup holder
    Custom shift boot/parking brake boot and handle
    Custom rewrapped Fat steering wheel
    Steering wheel controls from M5 wired to operate Stereo
    All new guages in center console with custom boost guage instead of clock
    New shift surround plastic in center console
    Speed sensitive windshield wiper module
    New door solenoids and window rail sliders
    New floor mats front and rear
    Rubber floor matts
    New carpet floor matts
    Z3 Mirrors adaptor with smaller rear view mirror
    Hardwired radar detector
    ZHP lighted 6 speed shift knob
    Aluminum pedals with dead pedal + solid dead pedal backing
    Removed warning labels from visors
    Mounted Race Logic Traction control knob in dash; when you turn it to the off position, the ASC light in the dash turns on
    Mounted Race Logic Traction Control launch control button in center console
    Rallyroad gauge pod mounted on steering wheel
    Customized Innovate Air/Fuel gauge to have BMW chrome trim bezel, mounted in gauge pod
    Customized Aquamist Meth Injection gauge to have BMW chrome trim bezel, mounted in gauge pod
    Installed dynamat sound insulation all over rear hatch area
    Have gone thorugh car and fixed all of the standard squeaks/rattles with felt shims 
    New trunk latch mechanism
     
  Stereo:__________________________________________________________________________
     Alpine ida-X305S receiver/ customized with ///M logo 
    Sirius module
    Blootooth module with handsfree kit; supports hands free and bluetooth streaming
    JL Audio  HD900/5 amp, 5-Channel Class D System Amplifier, 100 W x 4 + 500 W x 1
    Boston accoustic 6" front separate speakers
    Rear speakers 5.25"
    8" Kicker Solo-baric S8L7 subwoofer in custom MDF box that fits in stock location
     
  Accessories:_____________________________________________________________________
    Thule Bike rack
    Several interior spare parts that I have collected through the years
    Covercraft Form Fit Indoor Car cover
   

 

Print Print | Sitemap
© Koger Design